Open 24/7 for emergencies
A wet switch is a puck-shaped water sensor that sits on the floor beside your HVAC equipment. When water touches it, it cuts power to the system so a clogged drain can't keep flooding the basement.
5.0 stars across 1,132 reviews
Get your price in writing
Send this and the office calls or texts you back to set a time.
We’ll call or text this number about your request. By sending it you agree to our terms and privacy policy.
Rather talk now? (703) 997-9757
Licensed and insuredVirginia Class A contractor #2705192276
24/7 emergency serviceOften same-day, and we will tell you honestly when we can get there.
Our own HVAC installersA dedicated heating and cooling team, separate from our plumbers
Price in writing firstYou see every option priced before anything is ordered
Two SwiftPro techs have the front off a high-efficiency gas furnace in an unfinished basement, one kneeling at the cabinet and one running an impact driver. A third tech in a black SwiftPro polo faces the camera and holds up a packaged safety switch while he explains why they're adding it.
He points out water on the floor around the system, which happens when the condensate drain clogs. A trap-mounted switch protects the drain itself, he says, but the wet switch covers the floor, catching water the drain never does. It's tied into the system, and the soft spot on its underside trips the moment it gets wet.
His rule of thumb: an AC can send 5 to 20 gallons of water down that drain, depending on how much it runs and how humid the house is.
Hey guys, this is Diego with SwiftPro. We noticed that there's water on the floor in this system and that can happen because the drain is clogged. There's something that we can prevent that with and that is with a wet switch. And even though we can put an easy trap in there, this is just for the drain.
So, when the drain is clogged, that's what we use this for. And this is the sensor it uses. But, there's something else that we like to put. We like to put more safeties for water preventions in your home because it could flood over time like we said.
It takes about 5 to 20 gallons depending on how often you use your system and the humidity in the home as well. So, this wet switch is a great thing to use when you have water leaking on the floor that the drain doesn't catch. So, once this is like a hockey puck, once we connect it to the floor, there's a little soft spot at the bottom and when that has or detects or gets touched by water, automatically it turns off your system. So, there's two safeties.
So, you got the easy trap for the drain and the wet switch for the floor. And these are just water preventions for your system to last longer and potentially not ruin your basement.
A float switch only knows about water inside the drain or pan. A wet switch watches the floor, which catches a cracked pan, a leak from the furnace's own condensate fittings, or a drain that backs up somewhere the float can't see. In a finished basement, having both is cheap insurance against ruined flooring and drywall.
Want it done at your place? See AC Repair and Troubleshooting at SwiftPro or call (703) 997-9757.
0:53AC Float Switch: How an EZ Trap Shuts the System Off
0:34AC Contactor Replaced Early: What a Pitted One Looks Like
0:18Signs You Need HVAC Service, and a Sump Pump Past Saving
0:34Bad AC Compressor Symptoms: Gauges Before a Verdict
0:29What Does an AC Capacitor Do? A Look Inside the Panel
0:18AC Making Loud Noise? The Joke, Then the ReplacementRather pick the day yourself? Book online.
SwiftPro Heating, Cooling & Plumbing
4230 Lafayette Center Dr N, Chantilly, VA 20151
44679 Endicott Dr, Suite 211, Ashburn, VA 20147
Virginia Class A contractor license #2705192276