$500 offA new water heater, any size, replaced by our own plumbers.$500 off a new water heaterBook Online
(703) 997-9757CallBook Online
MenuClose
Heating
Air Conditioning
Plumber
Drains & Sewers
Water Heater
Duct & Dryer Vent Cleaning
Price Estimators
Offers
About Us
Service Areas
Commercial

Open 24/7 for emergencies

Video · Water Heaters

Water Heater Replacement Process, Heard Up Close

The water heater replacement process runs in order: shut off water and gas, drain and remove the old tank, set the new heater, pipe and vent it, then purge air and test. This clip catches the copper work and the delivery.

5.0 stars across 1,132 reviews

Get your price in writing

Send this and the office calls or texts you back to set a time.

This field is for validation purposes and should be left unchanged.

We’ll call or text this number about your request. By sending it you agree to our terms and privacy policy.

Rather talk now? (703) 997-9757

Licensed and insuredVirginia Class A contractor #2705192276

24/7 emergency serviceOften same-day, and we will tell you honestly when we can get there.

Our own plumbers, our own trucksNobody here is a subcontractor with a magnet on the door

The price is settled before the workYou see the number in writing before anything is taken apart

What you’re seeing in this video

Turn the sound up for this one. A tech in a gray hoodie and red work gloves rolls a pipe cutter around a length of copper, tightening the blade a little each turn, over a drop cloth laid down to keep the floor clean.

Then the delivery: a tech in a black SwiftPro cap and hoodie eases a boxed Navien condensing tankless water heater out of the van and onto a red hand truck. Once the old heater is out, the new piping gets cut and fitted to the new unit's connections, and the venting follows.

Job footageSwiftPro
Topic
Water Heaters
Length
0:36
Posted
September 4, 2026
Shot by
The SwiftPro crew, Northern Virginia

Why it matters in your house

  • A rotary pipe cutter leaves a square, clean end, which is what a solder joint needs to seal. A sloppy cut is how a new install starts dripping a week later.
  • Drop cloths on the floor are a small thing, and they tell you a lot about how the rest of the job will go.
  • Going from a tank to a condensing tankless adds steps: a condensate drain, PVC venting and often a larger gas line. Ask how each one is handled before install day.

What are the steps to replace a water heater?

Shut off the gas or power and the cold water, drain the old tank and disconnect it. Set the new heater, connect the water lines with new valves, hook up gas and venting, and add an expansion tank if the system needs one. Fill it, bleed the air out of the hot lines, light it and check for leaks and proper draft.

Want it done at your place? See Water Heaters at SwiftPro or call (703) 997-9757.

Want this done at your house?

Rather pick the day yourself? Book online.

SwiftPro Heating, Cooling & Plumbing
4230 Lafayette Center Dr N, Chantilly, VA 20151
44679 Endicott Dr, Suite 211, Ashburn, VA 20147
Virginia Class A contractor license #2705192276

Call Now Book Online
5.01,132 reviews